Skip to main content

Labtex News

New products and industry news

Huber Quick Connect Couplings – Switch Reactors Without Draining

20th September, 2016 by

Temperature control units are often connected to the application with insulated hoses (e.g. a reactor). There are different applications to be connected to the unit, then our quick-disconnect couplings are recommended. The quick-disconnect fills the special requirements that temperature control requires and reliably prevents leakage of thermal fluid. The quick-disconnect produces only a small pressure […]

Read more

Flow Measurement and Control

20th September, 2016 by

Huber offers a variety of measuring equipment for installation in the temperature control circuit in order to measure and control the flow rate. The flow rate can be displayed directly on the controller and can be requested and/or set through the digital interfaces (USB, RS232, LAN and optionally RS485, Profibus). It is also possible to […]

Read more

Low-Cost Cooler for Laboratory

20th September, 2016 by

The HTS has no mechanical refrigeration but is fitted with a circulation pump and a plate heat exchanger. This compact circulator provides low-cost cooling with a stable pressure and flow to the application. As no mechanical refrigeration system is fitted (compressor etc.), the machine is silent, efficient and energy saving. It offers an economical alternative […]

Read more

Huber Receives Award as “Top 100 Innovator” Again

20th September, 2016 by

In June this year, the 23rd Top 100 awards for Germany’s most innovative SMEs were presented and, after a rigorous, scientific selection process that analysed innovation management and successful innovation, Peter Huber Kältemaschinenbau GmbH was a member of this elite group for the fifth time. Although based in Offenburg, Huber technology can be found all […]

Read more

Labtex Values Working Relationship with Award-Winning Huber

12th January, 2016 by

Labtex distributes the highest quality specialist laboratory equipment, sourced from the very best designers and manufacturers in the world. Many of these manufacturers are market leaders in their chosen fields, providing innovative solutions to clients in research and industry. Multi-award winning German company Huber is the perfect example. Based in Offenburg, at the ‘Tango Factory’, […]

Read more

Labtex Celebrates 10 Years

12th January, 2016 by

Labtex is celebrating ten years as a specialist laboratory and process chemistry equipment solutions provider. Working with the world’s leading suppliers and manufacturing a range of its own branded products Huddersfield-based Labtex offers its clients the best in laboratory equipment. Founder and managing director, Greg Smith, revealed the secret to the company’s success. “We’ve always […]

Read more

Reactor Control and Data Capture – Labtex Appointed Distributor

27th November, 2015 by

RX-10™ – Reactor Control and Data Capture RX-10 combines the familiar METTLER TOLEDO reactor control touchscreen with various plug-and-play interfaces to control and monitor results from a broad range of jacketed lab reactors. Automate your jacketed laboratory reactor, by programming thermostat temperature, liquid dosing, and sampling, and integrating process analytical technology for data rich experiments, […]

Read more

Dynamic Temperature Control System Product Series Expanded

4th April, 2014 by

NEW: Grande Fleur  Less than a Unistat Tango, but more than a Petite Fleur, the new Grande Fleur expands the range of dynamic temperature control systems. Users now get even more performance at a low price. The Grande Fleur offers all of the great performance and features of the Unistat series such as USB, Ethernet […]

Read more

Asecos Innovation – The New Q-LINE 30 Safety Cabinet

4th April, 2014 by

Asecos now offers new cost-effective safety cabinets for storing flammable liquids. The Q-CLASSIC-30 cabinets conform to European standard EN 14470-1 to give flame resistance up to 30 minutes. The design of these new safety cabinets is based on the well-known Q series, Type 90 models. With a rugged and state-of-the-art design, the body and doors […]

Read more

Making Pharmaceuticals – From Research to Finished Product

4th April, 2014 by

29-30 April NNM Exhibition Centre Birmingham Making Pharmaceuticals is the only event in the UK dedicated to the detailed and complex issues associated with sourcing, manufacturing, outsourcing and delivering consistent pharmaceutical products to the market. Free to Attend The 2-day programme of over 45 seminars & workshops offering over 19 hours of content will take place at the NNM […]

Read more

Processing...
Thank you! Your subscription has been confirmed. You'll hear from us soon.
Join Newsletter
Here at Labtex we take your privacy seriously and will only use your personal information to provide the products and services you request from us. We do not give your information to any third parties for advertising purposes.
ErrorHere